Home » Products » Metal Bearings» Self-Lubricating Bearings » #50SP5-SL1 Solid Lubricated Brass Bearing
#50SP5-SL1

Solid Lubricated Brass Bearing

The #50SP5-SL1 solid lubricated brass bearing is primarily composed of high-strength special brass with HB>235. Its wear-resistant surface has a certain proportion of drilled holes. This kind of oil-free brass bearing is inset with a solid lubricant. Both its strength and hardness are higher than those of the #50 SP1-SL1.

Characteristics
1. Owing to higher mechanical strength and hardness, the solid lubricated brass bearing is provided with increased carrying capacity and abrasion resistance in comparison with #50SP1.
2. It can be applied in different industries such as mining machinery and engineering machinery.
3. The engineering machine bearing gives superb wear resistance under conditions of low speed and heavy load.
4. It is not suitable for use in seawater environment.

Technical Parameters

Material   

  
   Technical
   Chemical

#50SP1-SL1
CuZn25Al6
FeMn3
#50SP1-SL4
CuZn25Al6
FeMn3
#50SP5-SL1
CuZn25Al6
FeMn3
#50HP
CuZn25Al6
FeMn3
#50AB-SL1
CuAl10Ni
#50AB-SL4
CuAl10Ni
#50B
CuSn12
Cu 65 65 65 65 80 80 88
Sn             12
Pb 25 25 25 25      
Zn 6 6 6 6      
Ni         5 5  
Al         10 10  
Fe         5 5  
Mn 4 4 4 4      
Hardness
HB
>180 >180 >235 >250 >150 >150 >80
Tensile strength
N/mm²
>550 >550 >750 >785 >200 >200 >200
Elongation

>12   >12 >10 >10 >8 >8
Coefficient
of expansion
1.9×10-5/℃   1.9×10-5/℃ 1.9×10-5/℃ 1.6×10-5/℃ 1.8×10-5/℃ 1.8×10-5/℃
Limited Temp

300~400   300~400 300~400 400 400 400
Max load
N/mm²
80   100 118 50 70 70
MAX SPEED
M/min
15   15 10 20 10 10
Max PV
N/mm2*m/s
200   200 200 200 200 200
Compression set amount
400 N/mm²
<0.01   <0.01 <0.05 <0.04 <0.05 <0.05